Browse L4V's range of locks and security solutions for the Ford Courier 2024>
Side door
High
(Not suitable for glazed)
Mid
✕
Low
✕
Barn doors
High
✕
Mid
(Not suitable for glazed)
Low
✕
L4V Hook Lock
The L4V Hook Lock is a mechanical deadlock operating independently from the manufacturers' locking system. A deadlocking hook bolt engages into its opposing body section. Operated by its high-security external key under full control of the driver. Suitable for owner-drivers or applications where the driver can be relied upon to operate the lock.
Recommended Fitting Position
We recommend the L4V Hook Lock fitted high-position on the side load door and the L4V Hook Lock fitted mid-position on the rear barn doors.
The L4V Deadlock is a mechanical deadlock operating independently from the manufacturers’ locking system. It is very similar to the L4V Hook Lock however this lock engages a ‘straight bolt’ (20mm-50mm) into its opposing body section. Operated by its high-security external key under full control of the driver. Suitable for owner-drivers or applications where the driver can be relied upon to operate the lock. The L4V Deadlock is recommended for use on the vehicles cab doors.
Break-ins often occur as a result of the door skin being punctured to gain access to the internal mechanisms that open the door. The L4V Shielding Kit combines an external shield with a drill resistant internal plate to provide an increased level of security, reducing the risk of puncture and drill attacks.
Available for: N/S and O/S sliding doors (External shield + drill resistant internal plate) Barn Door (External shield/repair plate only)
L4V Anti-Peel Kits have been developed to reduce the risk of the common ‘peel and steal’ type of attack. Designed to reduce door peeling, this solution is fitted to the front edge of the vehicle’s side load door. We recommend using this product in conjunction with an L4V Hook Lock in the high position of the rear end of the same side load door.
The award-winning L4V Van Alarm is a professionally installed CAN-Bus alarm, designed to offer complete cab and load area protection. A combination of sensors and aftermarket sirens are housed in anti-sabotage bracketry, creating a system designed to help protect against the most frequent van attack methods. Load area features can be combined and changed to create a system that suits both commercial needs and budget.